Antifrogen L – Delivery to Latvia and Estonia

Translesta has over 15 years of experience supplying Antifrogen L coolant to businesses across the Baltic region.
We deliver directly to clients in Latvia and Estonia, providing reliable logistics and technical support.

Whether you’re in HVAC, food production, or industrial systems – we ensure fast and safe supply of Antifrogen L (propylene glycol-based coolant) for your application.

Need a quote or have questions?
Fill out the contact form
or call us directly at +370 699 64 740.

antifrogen-l-antifrizas-sildymo-vesinimo-sistemoms
Antifrogen L – Premium Coolant for Demanding Closed Systems

Antifrogen L is a high-performance heat transfer fluid based on pure, virgin propylene glycol, formulated with highly effective corrosion inhibitors. Designed for use in closed heating and cooling systems, it ensures long-term protection even under extreme conditions.

  • Made from pure, virgin propylene glycol

  • Free from phosphates, nitrites, amines, silicates, borates, and CMR substances

  • Operating temperature range: –30 °C to +150 °C

  • Minimum concentration: 25% by volume (approx. –10 °C protection)

  • Can be used as a concentrate or pre-mixed solution

  • Meets ASTM D 1384 corrosion protection standards

  • HVAC systems (heating, ventilation, air conditioning)

  • Food & beverage processing (e.g., ice cream, chocolate, dairy, meat)

  • Pharmaceutical & chemical industry (process cooling)

  • Heat pumps & underfloor heating

  • Sprinkler systems (VdS certified – G4040093)

The corrosion inhibitors in Antifrogen L form a protective layer on metal surfaces. Testing has shown minimal weight change even after 3,000 hours of operation. Provides long-term protection for steel, copper, cast iron, brass, aluminum, and their alloys.

ConcentrationFreeze Protection
30%approx. –13 °C
40%approx. –21 °C
50%approx. –33 °C
55%up to –40 °C

⚠️ Recommended maximum concentration: 50%
Tested according to ASTM D 1177

Antifrogen L is compatible with most common elastomers and plastics, including:

  • EPDM, PTFE, HDPE, PA, PP, SBR

⚠️ Not suitable with:

  • PU, PVC, phenolic resins

Compatible with Fermit® and Fermitol® sealing compounds.

  • Dilute only with demineralized or suitable tap water

  • Avoid use with galvanized (zinc-coated) components

  • Do not mix with other antifreezes or coolants

  • Clean the system thoroughly before filling (remove biofilm and scaling)

  • Density: 1.043 g/cm³

  • pH: ~9

  • Kinematic viscosity: 59 mm²/s

  • Boiling point: 155 °C

  • Flash point: 104 °C

Clariant International Ltd., Switzerland
More information: www.antifrogen.com

    Success! Your request has been sent to us.
    Error! There was an error sending your request.

    * Required fields. We will reply within 1 business day.